Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 17 Apr 2000 08:41:40 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
One other precaution you need to be aware of if you're going to "blast" an
assembled board is ESD. You can generate a static charge with the blasting
and any sensitive components need to be protected.
Mary Muller
ELDEC Corp.
> ----------
> From: Blomberg, Rainer (FL51)[SMTP:[log in to unmask]]
> Reply To: TechNet E-Mail Forum.;Blomberg, Rainer (FL51)
> Sent: Monday, April 17, 2000 8:09 AM
> To: [log in to unmask]
> Subject: Re: [TN] Roughing up a board
>
> As cleaning preparation for some of our bonding and coating operations, we
> have used a "soda blaster" using graded sodium bicarbonate (baking soda).
> This is not as aggressive (safer) and has the benefit of not embedding and
> dissolving totally in water. It is used in the same type of equipment as
> the aluminum oxide blaster.
>
> R. G. Blomberg
> Honeywell - Space Systems
> Staff Production Engineer
> (727) 539-5534 voice
> 727-539-4469 Fax
> [log in to unmask]
>
>
>
> -----Original Message-----
> From: Phil Crepeau [mailto:[log in to unmask]]
> Sent: Monday, April 17, 2000 10:42 AM
> To: [log in to unmask]
> Subject: Re: [TN] Roughing up a board
>
>
> hi,
>
> just a word of caution about grit blasting the pwb with alumina. if there
> is any tin-lead plating (or equivalent) present, there is a strong chance
> that the grit will become embedded in it. it has been my experience that
> the grit will be very, very difficult to remove.
>
> phil
>
> -----Original Message-----
> From: Mark Mazzoli [mailto:[log in to unmask]]
> Sent: Friday, April 14, 2000 3:36 PM
> To: [log in to unmask]
> Subject: Re: [TN] Roughing up a board
>
>
> Hi Jason,
>
> You might try having them processed through an aluminum oxide blaster. I
> don't know about the documentation part of your question but I think
> you'll
> find that a high-pressure media sprayer, like aluminum oxide or whatever,
> will "matte" the surface without removing copper or damaging any feature.
>
> Mark Mazzoli
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|