Sorry I missed the original question here, presuming you are looking for a method to
enhance adhesion to a hard, smooth surface, we (prior life) found that Running  a
finished pwb lot through a brief plasma etching did wonders to rough the surface
without damaging anything.

Ralph Vaughan
Arris-Interactive
Atlanta


"Blomberg, Rainer (FL51)" wrote:

> As cleaning preparation for some of our bonding and coating operations, we
> have used a "soda blaster" using graded sodium bicarbonate (baking soda).
> This is not as aggressive (safer) and has the benefit of not embedding and
> dissolving totally in water.  It is used in the same type of equipment as
> the aluminum oxide blaster.
>
> R. G. Blomberg
> Honeywell - Space Systems
> Staff Production Engineer
> (727) 539-5534 voice
> 727-539-4469 Fax
> [log in to unmask]
>
> -----Original Message-----
> From: Phil Crepeau [mailto:[log in to unmask]]
> Sent: Monday, April 17, 2000 10:42 AM
> To: [log in to unmask]
> Subject: Re: [TN] Roughing up a board
>
> hi,
>
> just a word of caution about grit blasting the pwb with alumina.  if there
> is any tin-lead plating (or equivalent) present, there is a strong chance
> that the grit will become embedded in it.  it has been my experience that
> the grit will be very, very difficult to remove.
>
> phil
>
> -----Original Message-----
> From: Mark Mazzoli [mailto:[log in to unmask]]
> Sent: Friday, April 14, 2000 3:36 PM
> To: [log in to unmask]
> Subject: Re: [TN] Roughing up a board
>
> Hi Jason,
>
> You might try having them processed through an aluminum oxide blaster.  I
> don't know about the documentation part of your question but I think you'll
> find that a high-pressure media sprayer, like aluminum oxide or whatever,
> will "matte" the surface without removing copper or damaging any feature.
>
> Mark Mazzoli
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################