Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 10 Apr 2000 15:58:14 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Van,
There have been a lot of discussion of 'Pin-in-paste'
(What you are trying to do!) in this forum and I am
sure you'll be able to find them in the archives of
technet. specific discussions on aperture
designs/suitable reference materials/reflow-compatible
connectors ETC. could be found.
Good Luck!
Murugan
--- Van Hoang Dinh <[log in to unmask]> wrote:
> HI ALL,
> ANYONE HAVE EXPERIENCE ON USING THROUGH HOLE
> CONNECTORS AT REFLOW OVEN?
>
> I MEAN IS : I BUILT A CIRCUIT BOARD WITH ALMOST OF
> THE PARTS ARE SMT (DOUBLE
> SIDES REFLOW),
> BUT THERE ARE 2 THROUGH HOLE CONNECTORS HAVE TO BE
> FIT ON. THEREFORE WE HAVE
> TO HAND SOLDER THOSE CONNECTORS( TAKE LONG TIME).
> I HAVE BEEN THINKING OF DEPOSITE SOLDER PASTE ON TOP
> OF CONNECTORS PAD(RING
> PADS) AND RUN THROUGH REFLOW.
>
> IF WE CAN
> WHAT SHOULD THE APERTURE SHAPE AND SIZE ON THE
> STENCIL OF THESE CONNECTORS
> PADS?
>
> THANKS,
> VAN
>
>
##############################################################
> TechNet Mail List provided as a free service by IPC
> using LISTSERV 1.8c
>
##############################################################
> To subscribe/unsubscribe, send a message to
> [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
>
##############################################################
> Please visit IPC web site
> (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at
> [log in to unmask] or
> 847-509-9700 ext.5315
>
##############################################################
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|