Jason:

Please advise what the telephone number will be for KJ Marketing.
How has this technique fared with BGA designs?
Are you using stencils under 6 mils with this material?
How has this compared to brass?

Charlie McMahon

[log in to unmask]
----- Original Message -----
From: Jason Gregory <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 10, 2000 9:21 AM
Subject: Re: [TN] polymer stencil


> Hello Raj,
>
> We use a Kapton stencil from KJ Marketing. They work great. The release is
far better than stainless and the other benefits are:
> -greater contrast visually from the paste (thus easier to spot plugging)
> -virtually no sag, therefore, better contact to pcb.
> -same or less cost than stainless.
>
> Try 'em out.
>
> Jason Gregory
> Production Manager
> Electrospec
> (713)784-4900
> (713)784-1194 fax
> [log in to unmask]
>
> >>> Rajkumar <[log in to unmask]> 04/10 7:59 AM >>>
> Hi Technetters,
>
> Is there anyone out there using polymer stencils for printing solder
paste? I would be interested if someone can share their experiences in
printing with these stencils.
>
> Regards
>
> Raj
>
>

!
> !
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################