John, 

Do you want to reuse your dross or just reduce the quantity of dross pulled out of your pot?

If you are simply trying to reduce the amount of dross you pull out, you can use a commercially available product to separate the good stuff from the bad.  We use a power called "Clean-Ox" (or something like that).  It seems to work well.  We then send our dross back to our supplier for reclaim.  I think we get some credit for this as well, but am not 100% sure.



Eric Kalgren
BFGoodrich Aerospace
Space Flight Systems
[log in to unmask]
(505) 938-5139

>>> parrrrr rossss <[log in to unmask]> 4/7/2000 4:04:40 AM >>>
Hi,

I have a question about dorss recycling :

Is there any off-line equipment in market
to separate the good  solder from the dross ( waste
collected from the wave solder pot) ?

John

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################