TECHNET Archives

April 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Goldman, Patricia J." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 25 Apr 2000 15:19:13 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (93 lines)
I also believe part of the problem is the notorious inefficiency of gold
plating baths, which is where the hydrogen gas comes from.  Besides what
Chuck has mentioned, do what you can to improve the bath efficiency.  This
includes keeping the gold concentration and bath salts at the supplier's
recommended concentrations.
Some dry films are better than others for gold plating, as they are better
able to handle the pH of the bath.
Another area to check is the dry film lamination process (optimum heat and
pressure?) and developing (don't overdevelop).

Patty
Patricia J. Goldman
PPG Industries, Inc.
412-492-5516
[log in to unmask]


-----Original Message-----
From: Chuck Brummer [mailto:[log in to unmask]]
Sent: Tuesday, April 25, 2000 3:06 PM
To: [log in to unmask]
Subject: Re: [TN] Gold leakage under Dryfilm


Gold baths are extremely good cleaners which can clean away the adhesion
promoter.
Another reason this can occur is the evolution of hydrogen gas leaving micro
environments of very high pH stripping the resist at the plating interface.
You can
try to lower the pH of your gold bath if the supplier specifications allow
or try a
different resist.

Chuck Brummer

Frank Barber wrote:

> I have a question,
>
>         Why would I see gold leakage under my dryfilm, when none of my
other
> plating leaks? (Including my sulfmate nickle!)  Any replies as to where to
> start looking would be appreciated.
>
> Thank You,
>
> Sal
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2