Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 19 Apr 2000 16:40:14 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
David,
Your supplier, if they do stressed sections on each lot, should see this
before they ship. My guess is smear, which occurs during drilling, and
should be removed by a chemical or plasma desmear process. Ask for
cross-section mounts from these lots and see if you observe any
separation.
Good Luck,
Rick Howieson
General Technology Corp.
>-----Original Message-----
>From: Smith, David V. [SMTP:[log in to unmask]]
>Sent: Wednesday, April 19, 2000 3:34 PM
>To: [log in to unmask]
>Subject: [TN] PCB question
>
>A question for the PCB gurus:
>
>We have been receiving boards from a supplier that are exhibiting
>separations at the interface between plated hole wall and internal layers
>(a.k.a. interplane separations, post separations, interconnect defects) in
>cross-section, after thermal stress. Specifically, the separations are
>occurring between the electroless copper and electrolytic copper. Horizontal
>cross-sectioning reveals that the location of the separations is consistent
>from hole to hole. For example, in a grouping of holes viewed in horizontal
>cross-section, the majority of holes will show the separation extending from
>the 6 o'clock position to the 11 o'clock position. Any suggestions on what
>process/processes the vendor should look to for troubleshooting?
>
>Thanks,
>David Smith
>Benchmark Electronics
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|