Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Sat, 15 Apr 2000 10:59:42 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Jason,
You do give us any indication what type of failure your module suffered, how
long after shipping it was returned, what the application (use environment)
is.
I take it you need your tests to determine the source of failure. You need to
first do a failure mode analysis (FMA)--this will tell you where the failure
is, what has failed, and typically (but not always) also will tell you what
the failure mechanism(s) and loading conditions are.
Since you--judging from your query--do not have any experience in this, you
should engage a competent commercial lab or consultant to do the FMA for you.
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 904-437-8747, Fax: 904-437-8737
E-mail: [log in to unmask], Website: www.engelmaier.com
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|