TECHNET Archives

March 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Albin, David" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 3 Mar 2000 08:39:12 -0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
Marvin
        If the resist is over copper and is cured/ dry, we have reasonable
success in measuring thickness with the electronic 'eddy current' devices.
We use the 'Elcometer' range, but I am sure there are others.....
If the resist is wet, you can use a 'wheel' or comb, which are specifically
designed & calibrated show the ink thickness.
There are X-ray techniques to measure dry resist thickness, but I don't know
how much they cost.
Hope some of this helps.

        David Albin
        Coates Circuit Products

-----Original Message-----
From: marvin v. picardal [mailto:[log in to unmask]]
Sent: 03 March 2000 20:21
To: [log in to unmask]
Subject: [TN] THICKNESS MEASUREMENT OF LIQUID RESIST


Dear technetters,

Hi all.  While I am busy performing my evaluation for the
detection & identification of contamination on metal surface,
I have another question.

Is there any other method of measuring thickness of liquid resist on
a surface aside from break test or scraping?  Please help.

Thanks in advance.

Marvin

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2