TECHNET Archives

March 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Darrel Therriault <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 29 Mar 2000 16:12:56 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
Technetters/Fabricators,

My supplier is having a problem with yield on our backplane (~.200",
SMOBC/HASL).  It seems to be centering around
hole plugging from HASL.  FHS are .024", .028", .032" for both pressfit and
pth connectors.  Is this a typical problem for
these requirements??

If so, what are other finishes to consider to achieve higher yields but not
introduce large cost adders??

Comments and suggestions appreciated.

Tks........DT

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2