TECHNET Archives

March 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jim Gleason <[log in to unmask]>
Reply To:
Jim Gleason <[log in to unmask]>
Date:
Fri, 17 Mar 2000 13:32:43 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
Give me a buzz at 972-494-1911. We've done plates for quite a few people.

Jim Gleason

----- Original Message -----
From: To My E-Mail Address <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, March 17, 2000 1:53 PM
Subject: Re: [TN] HELP!! Press-fit connector!


> Steve,
>
> One of our customers they had similar problem with press-fit connector.
I
> don't think it was right angle though.
>
> Anyway they asked us to prepare a backing plate (in this case we drilled a
> 0.125" mat'l with a bit larger holes than finished brd holes) that they
can
> use it as support under the brd.  You can have more thickness by stacking
> such plates to create clearance for components.  And after that they used
a
> hand press to install the connector.  They used metal plate over the
> connector to evently distribute the pressure.
>
> Hope this helps.
>
> Rush
> Accurate Engg
> 818-768-3919
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2