Timothy,
It might, but then I have dry film inspection personnel that work wonders
with a razor knife.
Franklin
----- Original Message -----
From: Timothy Reeves <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 14, 2000 9:28 AM
Subject: Re: [TN] Single v/s panel info on drawing & Gerber
> It also may have the other board fab's logo, date code, UL code, etc. on
it.
>
> > ----------
> > From: Jac Kroeker
> > Sent: Monday, March 13, 2000 12:51
> > Subject: Re: Single v/s panel info on drawing & gerber
> >
> > Franklin;
> >
> > You have outlined an excellent procedure below. Since the customer has
> > paid
> > for the tooling, he owns it.
> > I have one question.
> > If a customer comes to you with tooling in hand from another fabricator,
> > would you use it? (It might have been in the trunk of his car over the
> > weekend or longer.)
> >
> > Jac Kroeker
> > Omni Graphics Ltd.
> > 2-12760 Bathgate Way
> > Richmond, B.C. Canada
> > (604)276-9717
> >
> > >
> > >From a fabrication standpoint, this is how 99% of the jobs through are
> > shop
> > >are handled.
> > >
> > >1. A customer provides the 1 up
> > >2. They typcially specify any required spacing requirments, if not, we
> > ask.
> > >3. They also include any fiducial, railing, breakaways, etc, etc, etc.
> > >4. We CAM the job using a panel size IAW their finished array size
(i.e.
> > 18
> > >X 24 can hole quite a few arrayed panels if they are small enough).
Most
> > of
> > >our customers provide a finished array dimension, if not, we perform
this
> > >lay-up. We will then provide them proofs for review and approval prior
to
> > >starting the job.
> > >5. Upon approval we will fabricate the job and provide for them the
> > >step&repeat for their use in stencil making.
> > >6. As far as moving the job to another fabricator, don't you ask for
> > copies
> > >or original artwork and gerber back? You bought it, why not get you a
> > copy?
> > >
> > >I have to say that of the many thousands of jobs pouring through this
> > place
> > >annually I have never heard of those situations you have described. And
> > in
> > >my role as Quality Assurance Manager, you can bet your a** I would have
> > if
> > >we screwed it up.
> > >
> > >My advice, for what it's worth, work close with your fabricator, listen
> > to
> > >their input, and develop a working relationship, it will be a
> > win-win......
> > >
> > >Franklin D Asbell
> > >Network Circuits, Inc.
> > >Irving, Texas 75061
> > >972-313-1400
> > >
> >
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
