TECHNET Archives

March 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: IPC-610 Class II and III
From:
Alain Savard <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 9 Mar 2000 08:18:55 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (60 lines) 
You will find the proper description of each class in the FOREWORD section,
in IPC-610B page iv.

They refer to reliability of the finished product. Class 3 is most reliable
and interruption causes major problems. For class 2, Interruption are
undesired but are not critical.

Hope this helps,

Alain Savard, B.Sc.
Chemical Process Analyst
CAE Electronics Ltd.
e-mail: [log in to unmask]


-----Original Message-----
From: Bill Leonard [mailto:[log in to unmask]]
Sent: March 9, 2000 7:49 AM
To: [log in to unmask]
Subject: [TN] IPC-610 Class II and III


Good day,

Could someone tell me what is meant by Class II and III when referring to
IPC-610B? What is this significance?

Best regards,

Bill Leonard

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2