Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 9 Mar 2000 06:54:27 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We based upon our rework equipment to take temperature measurement.
The maximum surrounding temperature we determine is below 150 deg.C.
Based distance, 6 mm empty clearance so as to have easy rework if
required.
Poh
====================================================================
At 10:22 AM 3/8/00 -0800, you wrote:
>Hi all,
>What is a general quideline in perimeter clearance around BGAs for Rework.
>Thanks in Advance.
>
>Tom
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|