Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 31 Mar 2000 16:56:00 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rudy,
From your explanation I would assume that this process is self limiting in
terms of the amount of the deposit i.e. where you get the 0.2 micron Gold
deposit from.
Am I correct in assuming this?
Martin Christie
===== Original Message from [log in to unmask] (TechNet E-Mail Forum.) at
31/03/00 09:26
>James:
>
>Metals in solution are too low in electrons, and thus have a positive charge.
> Solid metals, in their shiney form, have the proper number of electrons.
>When a more "active" metal (meaning a metal that does not bind its electrons
>tightly) is immersed into a solution of a metal that does bind its electrons
>tightly, like Gold, the electrons shift from the substrate metal, (the
>substrate under Gold is almost always Nickel) to the metal in solution,
>causing the metal in solution to plate out spontaneously on to the substrate
>metal....in other words, a Nickel coated PCB, when immersed into a solution
>of Gold, will cause the Gold to plate out spontaneously on to the Nickel, and
>in the process some of the Nickel is dissolved and goes into solution.
>
>This continues until the substrate Nickel is covered, and no more Nickel is
>available for this chemical reaction, and you wind up with around 7-8
>microinches (0.2 micron) of Gold from this type of plating.
>
>Hope this helped...
>
>Rudy Sedlak
>RD Chemical Company
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|