Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 1 Mar 2000 13:44:54 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Regis
I worked in detail developing microvia (1-6 mils) fabrication with lasers.
If this is your range, I've used a Nikon that had a zoom lens and fiber
optical light. I don't know the model number, but it was a very good
optical microscope. The key is to be able to get close to 500X (10X eye
piece times the objective). You won't see barreling very easily because of
the line of sight unless you cross-section.
For larger vias, any run of the mill set up should work.
Carey
-----Original Message-----
From: Regis Froats <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, March 01, 2000 9:18 AM
Subject: [TN] Fiber Optic Microscope
>Does anyone know of a microscope equipped with fiber optics to inspect the
>barrel of vias in a PCB?
>
>--
>Regis Froats <[log in to unmask]>
>Process Engineer - Herco Technology Corp.
>13330 Evening Creek Drive North
>San Diego, Ca. 92128
>Pho:858.679.2800 - Fax:858.679.7565
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|