Try
Putnam Machine Shop
637 University Ave
San Jose, CA
408) 294-1052
He followed all my machine drawings to the letter. Sometimes to my
detriment, but really he was very helpful, accurate, and precise. Can't ask
for a better machine shop.
\----------------------\
\ Kenneth G. Stephens \
\ President \
CAD--->CAD 2 CAM, Inc. >---CAM
/ www.cad2cam.com /
/ 503-246-4692 /
/----------------------/
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Ken Patel
> Sent: Monday, March 06, 2000 9:59 AM
> To: [log in to unmask]
> Subject: [TN] Urgent Help: Parts scarcity at the worse; Laser/plastic
> cutting
> Importance: High
>
>
> Guys,
> Here is the bummer. Parts scarcity at the worse. Because we can
> not get the
> parts on time, we are looking for way around. Here is the situation.
>
> We need/use 200-pin female AMP connector, p/n 4-557103-1, normally on our
> board, but due to non-availability of the this 200 pin part, we have to do
> something with 100 pin AMP part, 2-557103-1, to make it work for 200-pin
> part. Here is our plan, take two 100 pin parts, cut one end of each
> connector so that both can fit into a board where only one 200
> pin part goes.
>
> Knowing this situation, I am left with only two options.
> (1) Does anyone has AMP 4-557103-1 in quantity so that we do not
> have to do
> that nasty operation.
> (2) Can someone provide info where I can my take 100-pin
> connectors and cut
> the plastic end? I think there must be a way to cut plastic end
> using either
> a laser technology or metal/plastic cutting technology.
>
> I will really appreciate any help on the subject. Preferred area
> is San Jose
> and surrounding vicinity as we are located in Milpitas.
>
>
> re,
> ken patel
>
> ______________________________________________________
> Ken Patel Phone: (408) 490-6804
> 1708 McCarthy Blvd. Fax: (408) 490-6859
> Milpitas, CA 95035 Beeper: (888) 769-1808
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|