TECHNET Archives

March 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Content-Type:
text/plain; charset=US-ASCII
X-To:
Tom Burek <[log in to unmask]>
Date:
Wed, 29 Mar 2000 14:10:49 -0500
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask]
Subject:
From:
Royce Taylor <[log in to unmask]>
Content-Transfer-Encoding:
7bit
Sender:
Parts/Attachments:
text/plain (63 lines)
     Tom,

     Most equipment vendors sell special nozzles for MELF's, they are
     either molded to fit the contour of the melf body or have a Vee notch
     cut in the nozzle. Universal, Mydata, Siemens, Quad (machines I have
     used) all sell these kinds of nozzles

     Royce
     **********************************************************
     Royce Taylor
     Sr. SMT Process Engineer
     Hadco Value Added Manufacturing
     10 Manor Parkway
     Salem, NH 03079
     (603)896-2192 voice
     (603)896-2006 fax
     (800)973-4679 pager
     email: [log in to unmask]



______________________________ Reply Separator _________________________________
Subject: [TN] Pick and Place of Melf Parts.
Author:  Tom Burek <[log in to unmask]> at smtplink-hadco
Date:    3/29/00 1:41 PM


Does anyone have any good ideas on how to pick and place a Melf component
without it sliding or falling off of the nozzle?  We are using a QSP2 but have
had some difficulty keeping it on the nozzle during pick and place.  Any
experience would be greatly appreciated.
Thank You,
Tom Burek

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2