Ioan , bad news, self teaching mode (costing extra $$$$$) selection criteria
has not been considered .
Something like opting for auto-gear for traffic weaving = desirable .
No lazy tricks with manual gearbox , sorry .

pk

-----Original Message-----
From: Tempea, Ioan [mailto:[log in to unmask]]
Sent: Tuesday, 29 February 2000 8:54
To: [log in to unmask]
Subject: [TN] AOI and component marking


Hi technos,

and especially you, SMT assembly AOI users.

Yes, we bought an AOI machine and have it up and running. The problem is
that with each reel changed on the p'n'p machines, the writing on the
components changes and the templates have to be readjusted. Is it natural?

The component engineer cannot impose font and alignment requirements so
we're stuck with tweaking the programs intensively.

Is this a problem that everybody has? Is this machine dependent and we chose
the wrong one? Are we not knowledgeable enough to do the right programming?
Any tricks to get better results?

Thanks,
Ioan

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################