Agree with Charlie , deployment of leveled surface grinder and photo slice
files of decent resolutions is a job for quiet achievers .
Charlie could you add me on list as well , and if you can resolve down to
ESD damage on IC's please .

Otherwise, Bill (no music relations?), if you have the time and money ;
digital (z axis records) surface grinder and 1200+ dpi camera hooked via
spreadsheets on one slide will do you,
(presume you can read components, if ID's are wiped off ; it's that much
harder and slower .

If we have here some ESD damage specialists (delayed factors experienced
especially) , would appreciate the hoy please .

thanks a lot                     Paul Klasek

-----Original Message-----
From: Charles E. McMahon [mailto:[log in to unmask]]
Sent: Thursday, 24 February 2000 10:24
To: [log in to unmask]
Subject: Re: [TN] reverse engineering


Happy to help on this application
Contact me off line and we'll proceed from there
Charlie McMahon
[log in to unmask]

----- Original Message -----
From: Bill  <mailto:[log in to unmask]> Dworak
To: [log in to unmask] <mailto:[log in to unmask]>
Sent: Wednesday, February 23, 2000 5:38 PM
Subject: [TN] reverse engineering

I have a part that my customer wants to manufacture a pcb, and a pcb is all
that they have no data no other info at all, this company just purchased a
littler company and the people that were involved with this certain project
are no where to be found not to mention that it is in a different country.
 What my question is can a finished product like this be reverse engineered
so that they can produce the proper data and whatever else is needed to mass
produce them? It is a pcmcia (4 layer) they have about a dozen of them. Any
help would be greatly appreciated.

Bill Dworak

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################