Hello Tom and everyone,

I am currently writing the procedures for conformal coating within my
company.  We are experimenting all with two methods: brushing and
spraying and the combination of both.  What is your exprience regarding
conformal coating process? and how did you get best results?.  Our
boards are hybrid, some are 90% through hole.

So far we've found that spraying the board first with a thin coat and
then brushing works the best.  Brushing itself causes lots of bubbles.

Thanks



Tom Burek wrote:
>
> The best way I know is when you conformal coat you include a glass coupon in the lot you are processing.  First you measure and record the thickness of the glass at least three areas on the glass.  You process the glass the same way and at the same time as your PCA's (spray, dip, etc.).  When you are through processing and curing the conformal coat you measure the glass in the same three places.  The difference being the thickness.
> Tom Burek
>
>  -----Original Message-----
> From: [log in to unmask] [SMTP:MIME :[log in to unmask]]
> Sent: Tuesday, February 22, 2000 6:10 PM
> To: [log in to unmask]
> Subject: [TN] Conformal Coating Thickness Gauge
>
>  << File: ENVELOPE.TXT >>
>  --------------------------------------------------------------------------  --
> Hello everyone,
>
> Can anyone direct me to the best way (or inspection equipment) to inspect
>
> the thickness on conformal coatings? TIA.
>
> Jason Gregory
> Production Manager
> Electrospec
> (713)784-4900
> (713)784-1194 fax
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################