TECHNET Archives

February 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Mauricio Castro <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 1 Feb 2000 09:49:15 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (102 lines)
Hot Bar soldering it's the technique to attach Flex Circuits to PCB, Flex
to Flex and Flat Ribbon Cable to PCB's.

If you attach Flex Circuits to PCB you need to add solder to the Pads.
Using an stencil to add more solder or order the PCB's with certain amount
of solder in those pads.

If you attach Flat Ribbon Cables to PCB, you'll need to have Solder Strip,
a kapton tape with solder for each pad.

Equipment for Hot Bar: Palomar Technologies (www.palpro.com) and Unitek
Miyachi (www.unitekmiyachi.com) this company uses Ceramic tips and metal
tips for hot bar soldering.

I read that Palomar bought Todcco, a company with a lot of expertise in Hot
Bar soldering solutions.

Fixturing is the key in the Hot Bar soldering.


Regards,

Mauricio Castro




At 08:29 AM 1/02/00 -0500, you wrote:
>Hi Everyone,
>   While you are answering Gabriela ,
>Could someone please also tell me what Hot Bar Soldering is.  This is my
frist time hearing those words. I don't need a lot just a brief statement
will do just fine.
>Thanks for your time
>Nancy T.
>
>
>>>> Gabriela Bogdan <[log in to unmask]> 01/31/00 06:36PM >>>
>Hi!
>Could somebody comment on Hot Bar soldering methods?
>-What are the requirements for coplanarity of leads?
>-What are the PCB pads finish requirements?
>- What flux to use and how to apply it (and clean it?)  if the component
>is resistant only to alcohols and deionized water, and not hermetic?
>I wonder if Aric Parr's comment about  not using no clean flux for touch
>up is valid for Hot Bar too.
>Thanks,
>Gaby
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
>
Mauricio Castro
New Products Mgr
CIMME SA de CV
Av. Federalismo Sur 368 Int 1-B, Col. Centro CP 44100
Guadalajara, Jal, Mexico
Tel: (523) 826-5437   Fax: (523) 826-5462
www.cimme.com.mx

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2