Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 28 Feb 2000 12:02:35 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Gaby,
You might want to check out Preleg wire at
http://hometown.aol.com/preleginc/page/index.htm. It is a proprietary system
that actually coats the mod wire in various types of hot melt adhesive that
can be activated using a small hand iron. I have used it previously with
some success, and believe that they have developed some better adhesive
formulations since then.
Mike McMonagle
PCBA Process Engineering
Telxon Corporation
(713) 307-2443
www.telxon.com
-----Original Message-----
From: Bogdan Gabi [mailto:[log in to unmask]]
Sent: Monday, February 28, 2000 10:35 AM
To: [log in to unmask]
Subject: [TN] Wire staking
Dear TechNetters!
Please help with safety regulations and materials for jumper wire staking.
We encounter the following problems with our current cyanoacrylate:
- workers complain about vapor inhalation although they work with exhaust
units;
- the strength of the adhesive is very low after wave soldering - we glue
the jumpers before wave soldering , on C.S.
- please reccommend materials used successfully and which method is the
least harmful.
Thank you,
Gaby
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|