Hi Tuan,
Just real briefly;  Zo is = to L/C (inductance over capacitance) and
capacitance is proportional to Er (dielectric constant), so C= Er A/d (area)
over d (distance/separation).
It is important to understand that solder resist is a dielectric and acts as
insulation to the surface traces, thus reducing the circulating currents.
I hope this helps.



Mike Beckman


[log in to unmask]

Packaging Engineer
Assembly Technology Division
CH5-157                                 Ofc. (602) 554-4232
5000 W. Chandler Blvd.            Fax (602) 554-7615
Chandler, Arizona 85226          Pgr. (602) 340-3983




 -----Original Message-----
From: Tuan Le [mailto:[log in to unmask]]
Sent: Thursday, February 17, 2000 12:13 PM
To: [log in to unmask]
Subject: [TN] Soldermask effect on impedance



Hi everyone,

I have done some tests recently by measuring impedance (on traces from the
coupons) before and after soldermask.  I found that there are quite a large
drop in impedance after soldermask: 4 to 6 ohms for single ended and 8 to 10
ohms for differential impedance.  Has anyone experienced this?  Could anyone
offer me an explanation of what happened?  We use the same Taiyo product for
a long while.

Your help is greatly appreciated.

Tuan Le
[log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################