Alexis

For laser drilling of microvias (100um or smaller), Speedboard is a good
material for throughput with UV lasers.  So are other resin-based materials
(e.g., RCC, polyclad).  I'm not sure it is worth the extra cost over resins
in terms of throughput.

Carey

-----Original Message-----
From: Alexis Meehan <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, February 09, 2000 9:38 AM
Subject: [TN] Speedboard Materials


>Has anyone out there tried the Speedboard laminates and prepreg for
>high-speed designs? I'd like to hear from folks who have tried it. Were the
>results satisfactory? Was there an increase in cost? Thanks in advance for
>any info you can provide.
>
>********************
>Alexis Meehan
>PCB CAD Mgr.
>408-328-4595
>[log in to unmask]
>LuxN, Inc.
>570 Maude Court
>Sunnyvale, CA 94086
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################