Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 3 Feb 2000 17:51:33 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
-----Original Message-----
From: Kenneth Kirby [mailto:[log in to unmask]]
Sent: Saturday, January 29, 2000 1:08 PM
To: [log in to unmask]
Subject: Re: [TN] Wave solder pot twemperature
Unless you are concerned abour the Delta T of ceramic caps you should run
the solder temp at 280-500 degres F. Yes, a low solder temperature will
result in skips and insufficient hole fill.
Ride The Wave,
Ken Kirby
Speedline Technologies
(Embedded
image moved Ivan Barrios <[log in to unmask]>
to file: 01/28/2000 02:21 PM
pic30074.pcx)
To: [log in to unmask]
cc: (bcc: Kenneth Kirby/ElectrovertUS/Cookson)
Subject: [TN] Wave solder pot twemperature
Is there a reccomendation on how hot the wave solder temperature should run
at
the pot/ We run at 450F and we are seeing some no solder on BSMT's is there
an
correlation in temperature vs no solders?
Thanks for any responses
Ivan Barrios
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|