I have a board design that requires 3 mil holes & the traces are 2 mil (air gap
is 10 Mil), 3 mil (air gap is 9 Mil) & 4 mil (air gap is 8 Mil) wide on 1/2 oz
copper. The material is GML1100 3.5 mil thick. Can anyone help me with someone
who can build this board.

Steve Collins
PCB Design Supervisor
Antec Corp.
[log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################