DESIGNERCOUNCIL Archives

January 2000

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: No artwork
From:
"Dallara, Louis T (Louis)" <[log in to unmask]>
Reply To:
DesignerCouncil E-Mail Forum.
Date:
Fri, 21 Jan 2000 10:30:28 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (33 lines) 
     Ron,
     The quickest way would be to have LSP engineering do scan and convert
it to a format
      you can use. I am not asscoated with them.
     contact Ian Nguyen @ 714.848.7568 or email [log in to unmask]
     Best Regards
     Lou Dallara

> ----------
> From:         Ron Ryan[SMTP:[log in to unmask]]
> Reply To:     DesignerCouncil E-Mail Forum.;Ron Ryan
> Sent:         Tuesday, January 18, 2000 5:03 PM
> To:   [log in to unmask]
> Subject:      [DC] No artwork
>
> We have a need to recreate printed circuit board artwork from an existing
> double sided board that was manufactured from hand taped artwork.
> Unfortunately all we have is the board. Our Cad system is PADS and
> AutoCad.  Any suggestions?? There are around 100 equivalent ICs.
>
> Thanks
>
>  >< >< >< >< >< >< >< >< >< ><
>         Ronald J. Ryan
> Brookhaven National Laboratory
> Instrumentation Division
> Building 535B
> Upton, New York 11973
>         voice......(516) 344-6068
>         [log in to unmask]
>  >< >< >< >< >< >< >< >< >< ><
>

ATOM RSS1 RSS2