Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Fri, 7 Jan 2000 15:25:29 -0500 |
Content-Type: | MULTIPART/MIXED |
Parts/Attachments: |
|
|
<<US Assemblies Tour.doc>>
The Susquehanna Region Chapter
of the IPC Designers Council
Announces a Tour of
US Assemblies - Endicott
Date: Wednesday January 19, 2000
Time: 6:30 - 8:00 pm
Place: US Assemblies Inc.
2507 Wayne Street, Endicott, NY
(Wayne Street can be found by going west on
17C towards Endicott, turning onto North Street then turning right onto
Hayes Ave. After crossing the railroad tracks Wayne Street should be to the
right. US Assemblies is the last building on the left. Parking can be
found just before the building. Go through the main entrance in front of
the building.)
Fee: $1 members, $3 non-members
Refreshments: Drink and a snack will be provided
Dave Jurena, Senior Process Development Engineer and Robert Stoller, General
Manager of US Assemblies have invited us for a tour of their facility. US
Assemblies assembles surface mount and through hole hardware designed by
their MATCO Design Facility or by other companies. Their experience in
dealing with many different Designers has provided them with insight on the
kinds of things designers can do to provide a producible design. They will
provide a tour of the facility and some time to discuss assembly issues.
Come and participate in the tour and discussion.
To get an idea of attendance, please RSVP
Rick Adams, Lockheed Martin Control Systems, (607) 770-2467,
[log in to unmask]
Or
Scott Hust, Lockheed Martin Control Systems, (607) 770-2146,
[log in to unmask]
The Susquehanna Region Chapter of the IPC Designers Council is dedicated to
providing educational opportunities for PWB Designers.
|
|
|