Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 13 Jan 2000 06:15:44 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Scott -
The use of dry pack is common amoung manufacturers of plastic encapsulated
microcircuits. Take a look at J-STD-20 for further information on the
classification system. Most component manufacturers are willing to share
information on their specific preparation and packaging techniques, and will
probably be willing to advise you in this area.
A couple of points to remember:
1] The vapor barrier is only as good as the packaging material and
the seal you apply to it;
2] Use of dry nitrogen is preferred over a vacuum. Pulling a vacuum
on a bag can damage or deform its contents;
3] Desiccant is generally not desirable in these applications - it
represents a large poorly controlled lump of material, and it can behave
like a sponge under the wrong conditions.
Regards - Kelly
-----Original Message-----
From: Scott Lefebvre <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, January 12, 2000 9:15 PM
Subject: [TN] Vacuum Sealing Components
>I wanted to know if vacuum sealing components with a desiccant bag inside
>would prevent me from having to bake my components. I work in a relative
>low humidity environment.
>
>Scott Lefebvre
>ADC
>530-265-1041
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|