Sender: |
|
X-To: |
|
Date: |
Fri, 7 Jan 2000 07:21:05 -0500 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
<618197157D1FD311B08D0090273C4C1D49D359@ZORRO> |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Paul, Can't tell you about the drill cycles but I do know there is no via
hole fill requirement for a class 3.
Linda Copeland
Raytheon
Chesapeake, Va.
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Paul Klasek
> Sent: Friday, January 07, 2000 12:01 AM
> To: [log in to unmask]
> Subject: [TN] Standard No. of via drill cycles
>
>
> Dear fab folks ;
> could you give me indication of "standard" No. of cycles on small
> via holes
> drill sizes ,
> on carbide and steel bits please ,
> and would there be a difference of utilization habits between say US and
> SEA/CHINA/SOB regions ?
>
> Facing patches of cracked vias , suspecting blunt drills > uneven barrel
> plate .
>
> And class 3 , is there via fill (solder) mandatory ?
>
> Thanks a lot
>
> Paul Klasek
> ResMed
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|