Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 5 Jan 2000 16:03:06 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Ken:
We use water soluble mask as a means of holding parts steady during wave
soldering. Basically we build the board and apply a bead of material over
all of the axial parts or where ever we can get a hold down point. We are
also building class 3 hardware.
Bill Kasprzak
Moog Inc.
> -----Original Message-----
> From: Kenny Bloomquist [SMTP:[log in to unmask]]
> Sent: Wednesday, January 05, 2000 10:54 AM
> To: [log in to unmask]
> Subject: [TN] Component Stabilizing for Wave Solder
>
> Hello Fellow TechNeters,
>
> We build Class 3 hardware per J-STD-001 and stabilize every through hole
> component prior to wave solder. I believe this is a hold over from Mil.
> Spec. days and wondering if anyone else is doing this. The requirement per
> J-STD-001 is to "process in a manner that precludes movement that
> detrimentally affects formation of acceptable solder connections."
>
> To stabilize or not to stabilize, that is the question.
>
> Thank you,
>
> Ken Bloomquist
> Sr. Principal Process Engineer
> PRIMEX Aerospace Company
> P.O. Box 97009
> Redmond, WA 98073-9709
> http://www.primextech.com
>
> Ph: 425-885-5000
> FAX: 425-882-5786
> [log in to unmask]
>
> Northcon/2000, Chairman of the Board
> http://www.northcon.org
>
> Electronics Manufacturers Association (EMA), President
> http://www.ema-wa.org
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|