Dear All,
 
 
These are 6 terms which are uncertain today, please give us your opinions.  : )
 
Thanks and regards 
 
 
Charlotte
 

Conductor Base Spacing               导线基本间距          60.0252

The spacing between conductors at the plane of the surface of a base material. (See also "Design Spacing of Conductors.") (See Figure C-8.)

基材表面平面处导线之间的间距。（参见“导线的设计间距。”）（见图C-8。）

 

Component Mounting Site          元件安装位置                    70.1632

A location on a Packaging and Interconnecting structure (P&I) that consists of a land pattern and conductor fan-out to additional lands for testing or vias that are associated with the mounting of a single component.

在封装和互连结构（P&I）上的特定区域，由连接盘图形和与到达用于测试或导通孔的其它连接盘的导线输出组成，与单个元件的安装有关。

 

Connector Housing                       连接器外壳                 37.0271

A plastic shell that holds electrical contacts in a specific field pattern that may also have polarization/keying bosses or slots.

将电接触件以特定形状固定的塑料外壳，也可能会有定位/锁紧凸出键或槽。

 

Contact Spring                                接触弹簧                    37.0282

The spring member of a socket-type contact that forces the engaging pin-type contact into a position of positive intimate contact.

插座型接触件的弹簧部分，它迫使插针型接触件插至可靠紧密接触位置。

 

Control Chart                                  控制图                         91.1368

A graphic representation of a characteristic of a process that shows plotted values of some statistic gathered from characteristic, a central line, and one or two statistically-derived control limits.

一种表示工艺特性的图表，显示了收集到的特性的统计数据、一条中心线及一条或两条根据统计得出的控制极限。

 

Creel                                                  经轴架                  44.0315

A device used as a yarn package rack to hold warp ends for a section beam.

为分条整经轴固定经线端的一种纱线架装置。