To you all that help me with finding reasons for clogging: pump is
Camelot 642-1, carbide housing and auger with following data
- thread depth is 85microns
- thread pitch is 1,500 microns
- thread peripherical is polished to Ra 40nm /TIR 300 nm
- thread shallow part is polished to Ra 1.5um/TIR 7um
- pressure at syringe level is 2 psi.
Needle removed: still clogging in the pump! Ain't she sweet! Don't know
if Tim wanted to be on his own. Some people do not want to cry out
details worldwide.
/Ingemar
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################