TECHNET Archives

June 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: solder mask
From:
[log in to unmask]
Date:
Sun, 15 Jun 1997 02:24:51 -0400 (EDT)
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines) 
The incompatibilities that I am aware of include:

1. During the fusing of the solder paste, flux will spread out onto the
surface of the solder mask and there will be a stain when the flux residues
are removed.

2. Solder balls will form on the surface of the solder mask after fusion of
the solder paste.

The best bet would be to check for compatibility between mask and solder
paste on unassembled boards.

Hope this helps

Larry Fisher
Dexter Electronic Materials
[log in to unmask] 

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2