TECHNET Archives

September 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Trace and Pad to Clinched Lead Clearance
From:
"Smith, Richard" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 9 Sep 1999 14:06:16 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines) 
> Folks,
>
> Is anyone out there using any additional clearance from a via pad or trace to a clinched lead other than what is needed for PWB fabrication? I recently saw a PCB DFM spec that called for .075" spacing from the center of the clinched lead to the nearest adjacent trace or pad. This was based on a 10 year old 'F' series Universal inserter.
>
> Rick

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2