Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 21 Jan 2002 08:34:51 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Yeah, me!
The spec you want is IEEE Std 1101.2-1992, but I don't think it's
free-downloadable. The board is 9.187+0.0000/-0.012 ins x 6.299 ins x
0.063+/-0.008 ins. A clearance of 0.098 ins at each side is specified to
permit the board to fit any VME standard chassis, and there is an overall
max height envelope from the board centreline on the component side of
0.571 ins (or 0.421 ins if you're using the permitted reduced chassis card
guide width). A similar dimension for the solder side of the board is 0.129
ins max.
There's a bunch of other stuff as well. The spec is very specific in
certain areas, but leaves a lot of room for designers' freedom of
expression as well. It's only a 9 page document, and if you need any other
details from it, do contact me off-line. I only have a paper copy of it
myself.
Peter
Stephen
Gregory To: [log in to unmask]
<SteveZeva@AO cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST
L.COM> Aero/ST Group)
Sent by: Subject: [TN] Mechanical Specifications for
TechNet VME boards...
<[log in to unmask]
ORG>
01/19/02
12:41 AM
Please
respond to
"TechNet
E-Mail
Forum.";
Please
respond to
SteveZeva
YAY! It's Friday!!
Does anybody know where I can get VME board mechanical spec's (dimensions,
etc.)?
Thanks!
-Steve Gregory-
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|