The MSC catalog has these and all you have to do is cut them to length and
width ( easily done on a band saw).
give me a call if you need thier number or have any questions.
Jim Gleason
972-494-1911
----- Original Message -----
From: "Edward S. Wheeler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 26, 2002 6:38 AM
Subject: Re: [TN] large plastic blocks/bars needed


> Call your local machine shop. They should have plenty of catalogs,
possibly
> material in house.
>
> Ed
>
>
> At 02:12 PM 3/25/2002 -0500, you wrote:
> >Good afternoon all,
> >
> >We have a project that needs plastic blocks 6x10x12 (in inches).  It can
> >be Polyethylene (Low Density), Polyethylene (High Density), Polypropylene
> >or PVC.  "Bar stock" would also work as long as we can cut the above
sized
> >blocks out of it.
> >
> >Any ideas for a source?
> >
> >Thanks in advance,
> >
> >Phil Nutting
> >
>
>---------------------------------------------------------------------------
------
> >Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> >To unsubscribe, send a message to [log in to unmask] with following text in
> >the BODY (NOT the subject field): SIGNOFF Technet
> >To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
> >SET Technet NOMAIL
> >To receive ONE mailing per day of all the posts: send e-mail to
> >[log in to unmask]: SET Technet Digest
> >Search previous postings at: www.ipc.org > On-Line Resources & Databases
>
> >E-mail Archives
> >Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
> >information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> >ext.5315
>
>---------------------------------------------------------------------------
------
> >
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------