Ron,

We have a 265 Horizon that had a similar issue. We were able to fix it
using our rescue disk, but the calibrations were off. We had to get a
DEK tech in. We did eventually replace the vision control board.

Best bet is to get someone in from DEK to look @ the machine. Sounds
like a major problem. Sorry could be more helpful.

John Burris
Mfg. Engineering Mgr.
Automated Logic/UTEC
Kennesaw, GA 30144
770.795.4827 (O)
770.795.3527 (F)
770.880.8710 (C)
[log in to unmask]

Ron Peeler wrote:

>Fellow Tech-netters,
>
>We have a DEK ELA printer with a vision system error and then it says system
>error, basic initialisation failed, fatal error -reinitialize machine.  I
>have already tried to re-calibrate the vision and even have rebooted it with
>the rescue disc.  I scanned over the cables that lead from the camera to the
>PC, but I don't see any issues.  None of my efforts have been fruitful.  Has
>anyone in the industry ever encountered this.
>
>Any help is appreciated.
>
>Thanks
>
>Ronald D. Peeler Jr., B.S. IE
>Process Engineer
>SWEMCO
>Moorestown, NJ 08057
>Tel: (856).222.9900 ext. 31
>Cel: (484).948.0779
>Fax: (856).222.0700
>[log in to unmask]
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>-----------------------------------------------------
>
>
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------