 
| Subject: | |
| From: | |
| Reply To: | |
| Date: | Fri, 11 Apr 2008 18:07:14 +0000 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
Sent via BlackBerry by AT&T
-----Original Message-----
From: Brian Ellis <[log in to unmask]>
Date: Fri, 11 Apr 2008 18:49:53
To:[log in to unmask]
Subject: Re: [TN] Possible flux contamination issue
24 years ago (yes 24!), I gave a paper at InterNepcon, in Brighton, UK,
entitled "Contamination on Components and Small Assemblies". I no
longer have a copy, but I'm fairly sure I evoked the need to have all
the components supplied clean to avoid just this kind of problem.
Brian
Steve Kelly wrote:
> Good Morning,
>
> We are assembling a BGA connector onto a flex circuit. The BGA has leaded
> balls and the BGA manufacturer uses a no-clean process to attach the balls
> to the connector and does not clean afterwards.
>
> When we assemble the BGA connector to the flex we use water soluble paste
> and then we clean. After damp heat cycling we have seen some shorts. When we
> take off the connector we see flux residues on the underside of the
> connector but not on the flex. So my question is - what are the concerns
> about mixing no-clean and water soluble? Is the failure likely due to
> inadequate cleaning or is there something else I should be concerned about.
> I realize this is probably not the way it should be done but some days you
> just do what the customer wants - good or bad. Thanks in advance. Steve
> Kelly
>
>
>
> Steve Kelly
>
> (416) 750-8433 (work)
>
> (416) 750-0016 (fax)
>
> (416) 577-8433 (cell)
>
>
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|
