Thanks, Erno.  I do need the slope of the laser cut...(one side is
smaller)..the aperture is not a big problem, it would be 6-8 mil size of
holes...(may be 4 in the future)...                   jk
At 08:19 AM 9/23/99 +0100, you wrote:
>Joyce,
>
>Lasercut stencils are physical possible under 4 Mil (even down to 3
>or 2 Mil) but there is a close relation with the width of the
>apertures. The rule of thomb is about thickness:aperture=1:1.5
>
>For electroformed stencils it is possible to produce any thickness
>(or thin-ness) we even produce stencils under 2 Mil. Here the rule
>of the thomb is about thickness:aperture=1:1.
>
>Date sent:              Wed, 22 Sep 1999 19:07:09 -0400
>Send reply to:          "TechNet E-Mail Forum." <[log in to unmask]>, joyce
<[log in to unmask]>
>From:                   joyce <[log in to unmask]>
>Subject:                [TN] thinnest stencil
>To:                     [log in to unmask]
>
>> What is the thinnest laser cut stencil exist on market?  4 mils? 3 mils? 2
>> (I think someone is going to tell me "get lost")...
>> Many thanks in advance...
>>                                jk
>>
>> ##############################################################
>> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>> ##############################################################
>> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>> the body:
>> To subscribe:   SUBSCRIBE TECHNET <your full name>
>> To unsubscribe:   SIGNOFF TECHNET
>> ##############################################################
>> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>> information.
>> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>> 847-509-9700 ext.5365
>> ##############################################################
>
>
>
>With kind regards,
>
>
>Erno Hannink
>
>Stork Veco B.V.
>Business Unit SMT
>Postbus 10, 6960 AA  Eerbeek
>Phone: (+31) 313 672610        BBS: (+31) 313 653407
>Fax  : (+31) 313 650629        E-mail: [log in to unmask]
>
>For orders: [log in to unmask]
>For sales: [log in to unmask]
>
>Find the latest info on http://www.veco.storkgroup.com
>For example under news you can find info on the Productronica.
>Stork Veco is exhibiting on stand number: B3.361
>
>Please find also our latest order check list (downloadable)
>on the site under: Products - SMT Stencils - Orderform
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################