TECHNET Archives

June 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
GEN: S.M. adhesives
From:
"Rob Palson" <[log in to unmask]>
Reply To:
[log in to unmask]
Date:
Mon, 9 Jun 1997 16:29:24 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
I have a double sided surface mount board with a  PLCC44 on one side 
and a 10 position dip switch (surface mount) on the other side.  Is 
there an  adhesive I could use to hold either of these 
components during reflow that would with stand reflow temps.(220 C)?  
We haven't started gluing any of our parts yet and we do not have a 
wave solder machine that can handle surface mount.  Please advise.  

Thank you
Rob Palson
Red Lion Controls
[log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2