Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Tue, 9 Dec 1997 19:41:15 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
KW/Randy,
This is just a sampling of some of the responses on the Internet to Hong
Yuen's problem.
Really need to resolve.
sam
>>> "Hong Yuen Electronics Ltd." <[log in to unmask]> 12/08/97 >>>
At 10:23 PM 1997/12/7 EST, you wrote:
>Assuming your developing process is in spec, soldermask residue is
indicative
>of too high a temperature at tack cure; overexposure could also cause
the
>problem.
>
>Where is the residue? Is it on the fiberglass or the copper or both?
>Give me your process parameters and I'll try to help.
>
>Mark Dowding
>Regional Technical Service Manager
>INSULECTRO
>
Our Process Parameters as follow : -
Pre Heat 15min for first side, 30min for second side, temp. 72 +/-
3degreeC
the residue was occured on the surface of the gold, especially on the
edge
of the hole,
also, the Stuffer Step is 10 - 12.
By the way, all the parameters we have used for more than one year.
Please advise
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|