Hi Ed - yes, I agree with your assessment. The solder source side isn't a
fixed side but one should only apply solder from one side or the other,
often component type/configuration dependent.

Dave Hillman
Rockwell Collins
[log in to unmask]


On Fri, Oct 14, 2016 at 1:01 PM, Ed Popielarski <[log in to unmask]>
wrote:

> I believe your interpretation is wrong. Solder can be applied from either
> side regardless of which side the part is on, as long as it conforms to all
> other applicable specs, i.e., hole fill, annular ring coverage on source
> side (regardless of which side that is), etc.
>
> Does anyone challenge that interpretation?
>
> Ed Popielarski
> Engineering Manager
>
>
>                                970 NE 21st Ct.
>                               Oak Harbor, Wa. 98277
>
>                               Ph: 360-675-1322
>                               Fx: 206-624-0695
>                               Cl: 360-544-2289
>
>
>
>        “It's one kind of victory to slay a beast, move a mountain, and
> cross a chasm, but it's another kind altogether to realize that the beast,
> the mountain, and the chasm were of your own design.”
> https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-
> 122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Edward Rios
> Sent: Friday, October 14, 2016 10:12 AM
> To: [log in to unmask]
> Subject: Re: [TN] Solder source side
>
> Here it is.
>
> https://drive.google.com/file/d/0B8z9mqSojHVnVE1UVTdwQVpnSEk/preview
>