Earl, Jim and others,

I will be delighted to send you information, but it must be off-line!

On-line, I can state that we have a patented process that conducts the
process in a sealed chamber using fluids with various boiling points to suit
the alloy you wish to use.

There is a heat plate in the base that is set to the desired temp so that
the fluid will vaporise. It will then condense on everything colder than it,
thus penetrate under the most discreet devices with absolute control and
efficiency.

When the process is complete - less than 1 minute - the vapour is "vacuum
pumped" out of the chamber. This then ensures the absolute minimal solvent
loss.

Refer to it as a dis-continuous process. The whole process is done in a
sealed chamber with doors at each end. If the chamber is big enough, you
could do a whole weeks soldering production in 2 minutes.

If y'all want more let me know.

Regards Graham Naisbitt

[log in to unmask] <mailto:[log in to unmask]>

Concoat Limited
Alasan House, Albany Park
Camberley GU16 7PH - UK

www.concoat.co.uk <http://www.concoat.co.uk>

Phone: +44 1276 691100
Fax: +44 1276 691227
Mobile: +44 79 6858 2121


> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Earl Moon
> Sent: 14 February 2002 15:49
> To: [log in to unmask]
> Subject: Re: [TN] Vapor Phase Soldering ReVisited!
>
>
> Jim and all,
>
> What's the status of the "new" condensation process technology?
>
> MoonMan
>
> ------------------------------------------------------------------
> ---------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources &
> Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ------------------------------------------------------------------
> ---------------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------