Subject: | |
From: | |
Date: | Tue, 11 Feb 97 14:27:04 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello !
I've been asked, by one of our engineers, about controlled impedance
boards. I'm new to this and was unable to give him any "good" information.
I knew, however, that I'd be able to obtain this information from all of
you ! ;)
First of all, are there and specs that will help with the design of a
controlled impedance board ?
Are there specs that a board fabricator will need to be aware of ?
Am I correct in saying that we (layout designers) and the fabricators are
going to need to work closely ?
Any help would be appreciated.
Thanks in advance
Lou Takach
Union Switch & Signal Inc.
412.688.2574 (voice)
412.688.2396 Wait for the tone then enter 2574# and hit [send]. The extra 4
digits direct the fax directly to my email account
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|