LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

August 1998

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET August 1998

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: [DC] PADs Database Errors
From:	[log in to unmask]
Reply To:	DesignerCouncil E-Mail Forum.
Date:	Tue, 25 Aug 1998 07:32:53 +0000
Content-Type:	text/plain
Parts/Attachments:	text/plain (45 lines)

Paul Anderson

The netlist compare is picking up trace width information that is out
of range.  This is common if you are using Viewlogic's Viewdraw.  To
make it simpler edit the .asc file and del the trace width information
that is right after the netname (12 0 0 0 -2 most of the time) and any
other numbers.  Hopefly There are no spaces in the netnames.  Then
create the ECO file using netlist compare the  .asc  from the
schematic is the new design.  After you making the ECO file make sure
there wasn't any trace width info magicly added (0 or 5 most of the
time).

That is the good news the bad news is you may have to rewrite/edit the
Pads config file in Viewdraw so that it only outputs the information
that you wont.

Robert Landers
PWB Design Lead
Amtech Systems Division
Albuquerque NM
[log in to unmask]

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2

LISTSERV.IPC.ORG