Seems like a repeat question from the past, but what is the assembly and/or inspection criteria for standoff height of through hole resistors (1W-5W) from PCB? I can't seem to find within J-STD-001 or 610. I found an RCD guideline but this seems to be more a rule of thumb than standard.

______________________________________
[Disc3.png]
Chris Thierolf
Principal EE and Project Engineer
L-3 Electronic Systems Segment
SPD Electrical Systems
13500 Roosevelt Boulevard
Philadelphia, PA 19116
Phone: (215) 698-6390    Fax: (215) 677-4736


________________________________
CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and all such rights are expressly claimed and are not waived. Unless specifically modified by L-3 SPD Electrical Systems , the content of this electronic transmission is to be read subject to L-3 SPD Electrical Systems  standard terms of business. This electronic transmission may be intercepted or affected by viruses and L-3 SPD Electrical Systems  accepts no responsibility for any interception or liability for any form of viruses introduced by this electronic transmission. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same.

ITAR CONTROL STATEMENT: In the event this document (or any of the enclosures) contains technical data within the definition of the International Traffic in Arms Regulations or Export Administration Regulations, it is subject to the export control laws of the U.S. Government. Transfer of this data by any means to a foreign person, whether in the United States or abroad, without an export license or other approval from the U.S. Department of State or Commerce, is prohibited.