I am currently trying to design solder masking pallets to eliminate the
need to use latex masking on the solder side of PTH boards. My problem
is that I cannot figure a way to keep the flux from weeping between the
pallet and the shielded portion of the boards. We are using a no-clean
flux in our process and this is leaving a residue on the masked areas.
The pallets are constructed of FR4/G10.
Does anyone have any experience with a situation similar to this?
Any help would be greatly appreciated.
Mark A.
Warycka
Manufacturing Engineer
The
Partlow-West Company
New
Hartford,NY
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################