Ken,

No wonder you are having problems, your finished hole size is way too big
for your pad, and the volume of paste able to be deposited onto the pad. I
would typically require a finished hole size of 10 mil + 0 / - 10. With 0603
pad sizes even this is not sufficient and you need to go even smaller with
the finished hole size. I am assuming you are talking an 0.063 inch board
thickness.

Thanks,
Robert Furrow
Printed Wiring Board Engineer
Supply Chain Networks
Lucent Technologies
978-960-3224    [log in to unmask]


-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Tuesday, March 05, 2002 2:11 PM
To: [log in to unmask]
Subject: Re: [TN] Via in Pad? Need Help!!!


We have via in pad of 603 and bigger size components including RF filters.
The
via size is 10 mil +3 /-10.

re,
ken patel

Kathy Kuhlow wrote:

> What type of component package?
>
> Kathy
>
>   ------------------------------------------------------------------------
>
>    TEXT.htmName: TEXT.htm
>            Type: Plain Text (text/plain)

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------